Search found 76 matches
- Mon Apr 01, 2024 7:33 pm
- Forum: Software support
- Topic: Imported flight plan from Simbrief sometimes incorrect.
- Replies: 9
- Views: 1018
Re: Imported flight plan from Simbrief sometimes incorrect.
Out of curiosity, do you know if it matters if the flight plan is imported before or after the IRS are fully aligned?
- Mon Feb 19, 2024 8:03 pm
- Forum: 3rd Party Software
- Topic: TOPCAT - TOGA Thrust
- Replies: 2
- Views: 707
Re: TOPCAT - TOGA Thrust
That is the expected behavior. When you click Compute (after updating the weather first) you will get the takeoff performance numbers for both TOGA and FLEX. TOGA is the first line, with the current OAT. FLEX options are listed below that for a few FLEX temperatures. If you click Results you will se...
- Wed Feb 14, 2024 2:50 pm
- Forum: Software support
- Topic: Decelerate point - Incorrect location
- Replies: 3
- Views: 545
Re: Decelerate point - Incorrect location
The blue arrow is a "level off" indication based on the selected altitude (FL200) which you can see at the bottom of the altitude tape. I believe that part is all normal. It's the location of the magenta (D) symbol that is incorrect, being way too early in the descent.
- Tue Feb 13, 2024 5:10 pm
- Forum: Software support
- Topic: Decelerate point - Incorrect location
- Replies: 3
- Views: 545
Decelerate point - Incorrect location
I have observed on some flights that the magenta (D) Decelerate Point is displayed much too early in the descent. See the example below where it is a little more than 10 NM ahead of the aircraft despite being still above FL280 and roughly 120 NM from the runway. This is with version B60.0.6 https://...
- Tue Feb 13, 2024 4:57 pm
- Forum: Software Discussions
- Topic: [Suggestion] Cabin temperature
- Replies: 1
- Views: 4940
Re: [Suggestion] Cabin temperature
I hope it's okay for me to bring back this topic. Would it be possible, as a simpler step in the direction of the suggestions above, to have an option by which the cabin temperature would be set to the OAT? Default behavior would be unchanged (starts at 24C) but with the option ON the 3 zones would ...
- Thu Feb 08, 2024 2:46 am
- Forum: Software support
- Topic: Terrain Display - Minimum Elevation
- Replies: 0
- Views: 615
Terrain Display - Minimum Elevation
I have noticed in several locations that when using the terrain display on the ND the minimum elevation is quite often "-13" (minus 13), which I believe would indicate -1,300 ft. Here is an example: https://www.flightpathsimulation.club/wp-content/uploads/jeehell-issues/Terrain%20-%20Min%2...
- Thu Feb 08, 2024 2:37 am
- Forum: Software support
- Topic: IRS INIT
- Replies: 1
- Views: 2826
Re: IRS INIT
Here is an example of this issue. Notice the "005 37.10E", which I believe should read "005 38.0E".
- Thu Feb 08, 2024 2:21 am
- Forum: News
- Topic: A320 FMGS B60
- Replies: 19
- Views: 9368
Re: A320 FMGS B60
I can confirm the behavior described by Bernd. I have seen this behavior as well. Basically the flight path is not displaying part of the SID past a certain fix. It happened for example on the VEBI1Y SID out of runway 28 at LSZH (no path after ZH544, until you fly past that waypoint). And to avoid ...
- Thu Feb 08, 2024 2:10 am
- Forum: Software support
- Topic: Overhead not connected
- Replies: 20
- Views: 4055
Re: Overhead not connected
Unfortunately I have to report that I have observed the Overhead disconnected issue 3 times in the last 2 weeks. I have been using B60 for maybe 5-6 weeks now but I don't know if it related to the upgrade or not. It seems that the issue was less frequent (maybe even absent?) with B59 (but present on...
Re: FS2020
One is never too careful indeed but this seems all legit.
Thanks Scorpi1987 for sharing this and for your efforts. I know numerous people are patiently waiting for JeeHell FMGS to work in MSFS2020.
Thanks Scorpi1987 for sharing this and for your efforts. I know numerous people are patiently waiting for JeeHell FMGS to work in MSFS2020.
Re: FS2020
Very interesting. Is Sven mod publicly available?
Thanks in advance for any additional information you could provide.
Thanks in advance for any additional information you could provide.
- Sat Jan 20, 2024 9:39 pm
- Forum: Software support
- Topic: LDG FLAP 3 push button
- Replies: 4
- Views: 2052
Re: LDG FLAP 3 push button
Thanks for checking. It looks like it might have been a one time fluke. Everything seems back to normal now (I think I did press the Emergency Gen Test as part of my debugging and that might have fixed it).
- Sun Dec 31, 2023 1:24 am
- Forum: Software support
- Topic: Red/Green Nav Lights
- Replies: 12
- Views: 4023
Re: Red/Green Nav Lights
I'm not sure if I remember correctly but I believe I had to delete the shader cache when tinkering with the lights for any change to take effect. Might be worth a try.
- Sun Dec 31, 2023 1:21 am
- Forum: Software support
- Topic: LDG FLAP 3 push button
- Replies: 4
- Views: 2052
Re: LDG FLAP 3 push button
I'm using a Skalarki overhead panel.
All 3 PCs have been updated to the latest version as per the usual procedure.
The overhead is connected to the main PC running the sim and the FMGS server.
All 3 PCs have been updated to the latest version as per the usual procedure.
The overhead is connected to the main PC running the sim and the FMGS server.
- Sat Dec 30, 2023 12:00 am
- Forum: Software support
- Topic: ETP display on ND
- Replies: 0
- Views: 3253
ETP display on ND
Another thing I observed after installing B60.0.6 is that the ETP point on the ND is sometimes incorrectly displayed:
- The text "(ETP)" is displayed at the correct location along the flight route, but
- The green ETP circle appears around the waypoint preceding the correct ETP location
- The text "(ETP)" is displayed at the correct location along the flight route, but
- The green ETP circle appears around the waypoint preceding the correct ETP location
- Fri Dec 29, 2023 11:50 pm
- Forum: Software support
- Topic: LDG FLAP 3 push button
- Replies: 4
- Views: 2052
LDG FLAP 3 push button
I just updated to B60.0.6 today and noticed that if you press (turn ON) the LDG FLAP 3 push button on the overhead the red FAULT light on the RAT & EMER GEN comes on.
Could someone confirm this?
Thanks,
Could someone confirm this?
Thanks,
- Thu Dec 21, 2023 11:45 pm
- Forum: 3rd Party Software
- Topic: pero | EXT PWR by GSX
- Replies: 45
- Views: 12733
Re: pero | EXT PWR by GSX
Thanks for the update!
- Wed Dec 13, 2023 2:02 pm
- Forum: Software support
- Topic: NWS disconnect memo
- Replies: 10
- Views: 1860
Re: NWS disconnect memo
Great suggestion. This would be a nice addition!
- Sat Nov 11, 2023 3:19 pm
- Forum: Software support
- Topic: Trim wheel is not set to 0 after touchdown
- Replies: 12
- Views: 3724
Re: Trim wheel is not set to 0 after touchdown
I have observed the same issue. It was working in previous versions.
- Tue Nov 07, 2023 2:42 pm
- Forum: General Discussions
- Topic: WorldFlight 2023 - VATSIM Charity Event
- Replies: 1
- Views: 3087
Re: WorldFlight 2023 - VATSIM Charity Event
WorldFlight 2023 is now in full swing and the VATSIM community is getting used to the JeeHell (JHL) callsign!
Check it out when you have a minute:
https://www.flightpathsimulation.club/w ... 2023-live/
Check it out when you have a minute:
https://www.flightpathsimulation.club/w ... 2023-live/
- Fri Oct 13, 2023 4:18 pm
- Forum: Software Discussions
- Topic: Adding Airport to JeeHell NavData
- Replies: 2
- Views: 3588
Re: Adding Airport to JeeHell NavData
Very nice. It looks like the file even has the old approach into Queenstown (NZQN), famous for this video:
- Thu Sep 28, 2023 5:22 pm
- Forum: Software Discussions
- Topic: P3d v6
- Replies: 36
- Views: 26003
Re: P3d v6
I have done a short test flight with the latest update(and the new "trimwheel feedback" option set to 'no', which was the default) and haven't experienced the auto-pilot disconnect issue. However one thing I noticed is that the trimwheel on my Skalarki hardware does not return to 0.0 anymo...
- Tue Sep 26, 2023 8:49 pm
- Forum: Software Discussions
- Topic: P3d v6
- Replies: 36
- Views: 26003
Re: P3d v6
I too have had several auto-pilot disconnects with the new B59 version. They happened in various phases of the flight and there was no turbulence or bad weather. Really not sure what could be causing this.
- Tue Sep 05, 2023 6:18 pm
- Forum: General Discussions
- Topic: WorldFlight 2023 - VATSIM Charity Event
- Replies: 1
- Views: 3087
WorldFlight 2023 - VATSIM Charity Event
Hi everyone, A few of us who are running JeeHell FMGS freeware on our A320 cockpits decided last year to participate in WorldFlight, a week-long charity event on VATSIM. We learned a lot, raised more than $1,500 for various charities, and had a lot of fun flying around the world. So much that we can...
- Sat Jun 03, 2023 1:11 am
- Forum: Software support
- Topic: Landing elevation resets to 0 when descending
- Replies: 1
- Views: 863
Re: Landing elevation resets to 0 when descending
I want to add some more information on this topic. It does not matter what the destination airport is, the issue is present on every single flight. Shortly after starting my descent, maybe 700 or 800 ft below my cruising altitude (which I just left), the LDG ELEV indication, although still indicatin...