JeeHell FMGS forums

I've been trying all day today to find stuttering through GES. I think I found a way to reduce the stuttering. That’s a good thought. However if there are GES/GEN related issues, they appear very local. For example, I have no issues at all, when taking off EDDL23L. Only 05R. I will test tomorrow th...

Hi all, @Thierry, interesting, that in your case it works. Hopefully it helps us to find out, what the difference is. Can you link your video please? Here's my video with shaking at DL013: https://www.dropbox.com/s/sn990tnf4n2kyc9/Shaking.mp4?dl=0 Comments: - it looks like even before and after the ...

Thank you for the additional testing, Dieter. At least I know now, that it’s not only me. I don’t use any tweaks, either. Maybe others can test this flight (EDDL05R - DL013 - MISGO) too, to provide JL with more insights. Because it is only happening at some waypoints. This one (DL013) seems to be re...

jeehell wrote: ↑Fri Apr 21, 2023 4:08 am Do you have active sky?

not used during the test flight

dkreiskott wrote: ↑Thu Apr 20, 2023 9:15 pm Hi Michael,
Why do you have fbw.exe on p3d PC?

I first tried with replacing the FBW.exe only on the FMGS PC, but still experienced the shaking. So I thought, it might need to be replaced on P3D PC, too...

After updating to B58 I am experiencing an interruption during the engine spool up. After engine start N2 starts running up to 20%. At that point the EGT is at 16 C°. Then the engine sound stops for a second and I see EGT suddenly jumping to 32 C° and continue increasing and with sound being back fr...

I upgraded to B58.0.2 and installed the new FBW.exe on both, the FMGS server PC and the P3D PC. But unfortunately I still have the shaking. No difference at all. I am using an i7-4790k@4GHz on the FMGS server. Besides FMGS, only Skalarki Profiler is running. All hardware (sidesticks, rudders, thrott...

These are my Profiler Settings for the Landing Lights:

L/R LAND LIGHT ON
On-State: On
Off State: Off

L/R LAND LIGHT RET
On-State: Retract
Off State: Off

Maybe it works in my case , because I don't use the P&P version. I use the self assembled kit from Skalarki.

I could reduce the impact somehow, so please try this FBW: https://www.jeehell.org/FBW.exe and let me know. HI Jean Luc, the new FBW.exe didn't work for me... no thrust and some reverser messages on the ECAM. I guess, this is because I am still on B57? @Dieter, which version did you fly for your te...

Hi Dieter,

I am on B57 but don't have this issue.

I have the Profiler only installed on the FMGS Server machine

@Jean Luc, which hardware specs does your single machine have?

Maybe someone with dedicated FMGS server machine and without shaking problems can post their hardware specs for both machines, too!

Would be interested to see, in which scenario the shaking can be avoided.

That is why I am sceptical about some of the tuning adjustments described above. I concur this. Because the issue only exists since version B57, in which the remodelling of the AP logic has been changed. However, I will also test the tip from Basti with the CPU priorities. I have a K-pcocessor, tho...

Could you all make sure there is no issues at all in manual flight? Because disconnecting AP when it happens does not mean it won't happen in manual flight. It could just be resetting some controller inside the code at a proper timing. So I was flying the same track (EDDL05R DL013 MISGO) today with...

Hi Bernd, Dieter, Thank you for your further investigations and explanations. So it has something to do with the data exchange during scenery loading. Anyhow - and I say this with full respect and appreciation of Jean Luc's development work - it is just unfortunate, that we now have to look for a so...

SoI finally found time to do some test flights. I did around a dozen flights today, always restarting all software from scratch. Here's what I found out: First, I could reproduce the shaking, when flying the same flight plan as Dieter (EDDL 05R - DL013 - MISGO ...) > shaking starts exactly at DL013,...

Hi Dieter,

I can not confirm. Nose light is off at C&D start and turning it on/off works like it should.

I can send you a screenshot of my Profiler settings.

dkreiskott wrote: ↑Tue Apr 04, 2023 12:05 pm

michael1508 wrote: ↑Tue Apr 04, 2023 11:49 am Hi Dieter, I’ll PM you for the flight plan and to check, if the stutter / shaking starts at the exact point.

Could it be, that the stutter itself is a cause of the AP reworking ??

P.S. I don't have a PM from you

I emailed you

Hi Dieter, I’ll PM you for the flight plan and to check, if the stutter / shaking starts at the exact point.

Could it be, that the stutter itself is a cause of the AP reworking ??

Since B57 the AP/FBW was highly reworked, and it is more subject to issues if there is low FPS or high latency, the latter being increased by network. On some systems it works in remote mode, on some it doesn't and I don't know the exact reason. Antivirus and firewall are of course big killer items...

Hi Jean Luc,

I am experiencing the same issue, since I upgraded to B57 I believe.
Indeed , reducing the turbulence effect helps, when flying with AS. But it also appears without AS.

No issues at all in regards to this behavior before B57.

Hi Bernd,

Thanks for sharing more light on the aircraft.cfg settings.

I've had the P3D settings already in mind, as both of them are activated so far. As real as it gets

Just wanted to make sure, the plane's behaviour is a consequence of my poor flying and not a software issue

Thanks

Is it normal, that after a bumpy landing the plane is difficult to steer? I had some crosswinds today and did my landing was anything else but soft :-) After that it was not possible to taxi straight forward - it always moved to the side. Is this due to damage I caused to the wheels? Can I deselect ...

Ah ok! So I should change the callsign to OPS... just to use with Topcat.

Good to know! Thank you, Peter

Hi guys, quick question on the correct flightnumbers to use. In the MCDU and in L2H I use DLH123. However for Hoppie my callsign is actually LH123, which I have also configured on the Topcat/Acars page. I can receive the ACARS messages, but I believe I should have everywhere the same callsign. So th...

Issue resolved.

The PC did not automatically switch to summertim, which caused the licence issue.