Red/green effects on outside objects
-
- Posts: 179
- Joined: Fri Nov 04, 2022 4:07 pm
- Location: EDDL
Red/green effects on outside objects
Hi Jean Luc, all,
I am experiencing some strange colour effects since updating to B57.
Objects to the left are getting a red tone, while objects to the right are getting a green tone. Center view is ok.
You would think, that this has something to do with the graphics card or P3D, but the funny thing is, it only appears with FMGS running!
See attached pictures, parking in front of a hangar, where the effect comes out pretty well.
Lower pic with engines running. Upper one after turning engines and power off (normal again).
Any idea?
I am experiencing some strange colour effects since updating to B57.
Objects to the left are getting a red tone, while objects to the right are getting a green tone. Center view is ok.
You would think, that this has something to do with the graphics card or P3D, but the funny thing is, it only appears with FMGS running!
See attached pictures, parking in front of a hangar, where the effect comes out pretty well.
Lower pic with engines running. Upper one after turning engines and power off (normal again).
Any idea?
You do not have the required permissions to view the files attached to this post.
Regards
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Re: Red/green effects on outside objects
those are the nav lights reflecting on the building, I need to work a bit on the light effects to avoid those.
Regards,
Jean Luc
Jean Luc
Re: Red/green effects on outside objects
I had the same problem but someone posted a solution a while ago which is , if I remeber correctly, go to a320fmgs/aircraft/effects and open the fx navred and fx navgreen in notepad then lower the xscale where the number 600 appears to number 2 . You can tweak the value according to your liking.
Regards
Mike
Mike
-
- Posts: 179
- Joined: Fri Nov 04, 2022 4:07 pm
- Location: EDDL
Re: Red/green effects on outside objects
ah ok, indeed a bit too strong light effect
I will try to adjust the light effect according to the post from Mike. Or deactivate the new ext lights.
I remember, i had to create a file like “old ext lights.txt” or so.
Can you please share again the how to?
Thanks
Regards
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Re: Red/green effects on outside objects
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
-
- Posts: 179
- Joined: Fri Nov 04, 2022 4:07 pm
- Location: EDDL
Re: Red/green effects on outside objects
Excellent - Thanks a lot!!!balu69 wrote: ↑Mon Nov 14, 2022 4:09 pm Hi
you can find my customized fx files here
https://alinga.ch/ExteriorLights.zip
Did you also rework the other lights (i.e. landing light)?
Regards
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Re: Red/green effects on outside objects
yes, i adjusted all lights. I also set the lights not to illuminate the area during the day (Intensity Day=0). I think these are more realistic that way.
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
-
- Posts: 133
- Joined: Thu Nov 03, 2022 9:24 pm
Re: Red/green effects on outside objects
balu69 and michael1508: don´t you experience any stutters at the take off role while on the runway with the new lights activated?
Regards
Bernd
P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
Bernd
P3D 6, I9-9900K overcl+ RTX3090 24GB, Skalarki Homecockpit + JH FMGS on a dedicated Server, AS/ASCA, EnVShade +Tex, PF3 + MCE, CorteManager + ExtPWR from CaptPERO, AIGAIM and many of add-on sceneries
Re: Red/green effects on outside objects
hi bernd
no, I don't notice any stutters (by day). But would have to test at night and in bad weather. get in touch
no, I don't notice any stutters (by day). But would have to test at night and in bad weather. get in touch
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
-
- Posts: 179
- Joined: Fri Nov 04, 2022 4:07 pm
- Location: EDDL
Re: Red/green effects on outside objects
Hi Bernd,
I experience the less stutters, the lower the light intensity.
Taking the light files from balu69 as basis, I even lowered intensity of Landing lights to 10 at night / 6 at day.
So I still have some light effects during morning or early evening hours.
FPS during day is ok. At nights still hitting a bit, but not as bad as the default lights, which are anyway much too bright
I experience the less stutters, the lower the light intensity.
Taking the light files from balu69 as basis, I even lowered intensity of Landing lights to 10 at night / 6 at day.
So I still have some light effects during morning or early evening hours.
FPS during day is ok. At nights still hitting a bit, but not as bad as the default lights, which are anyway much too bright
Regards
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Michael
P3D v5.4 | Skalarki | 3 projector 180° screen | i9-13900k | RTX 4080
Re: Red/green effects on outside objects
The link to the files does not work any longer, could someone give me access to the files or could you, Stephan, make them available again - THX in advance!
See you in the skies…
Re: Red/green effects on outside objects
Sorry, it is available again.
Greetings
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google
Stephan
P3D V5.4, Skalarki FCU, MCDU, RMP, ECAM, TCAS, own OVH-Panel and MIP with Leo Bodnar and Arduino, Thrustmaster TCA Captain Pack Airbus Edition, Thrustmaster TPR Pendular Rudder
P.S. translate by google