remote joy problems

[joao.fernandescmte]

I installed the mcdu on machine 2 in the remote option joy after configuration it is working perfectly however when I press the numbers or letters it repeats twice I have done everything and I have not found the problem, can you help

[jeehell]

you assigned joystick events to MCDU keys? try to only assign the PUSH event then.

[joao.fernandescmte]

Good afternoon, ok I will try, thanks

[joao.fernandescmte]

GOOD EVENING, I DID WHAT YOU ASKED, BUT IT DIDN'T WORK, AS I SAID, I TRIED EVERYTHING, AS I USE 3 MACHINES, ONE MAIN AND TWO MORE, PILOT AND CO-PILOT, I TESTED ON TWO WITHOUT SUCCESS, IT WORKS ONLY ON THE MAIN MACHINE WHERE THE SERVER IS INSTALLED . THE ALARMS WORK BUT THEY DON'T TURN OFF IT'S AS IF I HAD ALWAYS PRESSED THE BUTTON, I TESTED IT WITH OTHER BOARDS AND CONTROLS AND IT DIDN'T WORK ALSO.

[joao.fernandescmte]

NOT TO CONFUSE I HAD TWO PROBLEMS VIA REMOTE , THE MCDU DOUBLES THE ACTION OF EACH BUTTON AND NOW ANOTHER PROBLEM IN THE OVERHAD WHERE THE FIRE ALARMS ARE DIRECTLY ACTIVATED , I THINK IT COMES FROM THE SAME PROBLEM