Pfd and Nd blank after start the software

Ask here for software oriented support
Post Reply
sxa1376
Posts: 3
Joined: Fri Jun 14, 2024 9:37 am

Pfd and Nd blank after start the software

Post by sxa1376 »

Hello guys,
I need some help in order to make this work.
Until now i had "A320FMGS_B53.3.6" and everything working perfect.
Now after i installed the latest version after starting the software the pfd and the nd
displays are blank and if i move the cursor over one of them and press the left or right button
are crashing. What i am doing wrong? The pc i am running the pfd and nd is a I7930 cpu
with 12 giga of ram and a GeForce 9800GTX+ gpu.
Many thanks in advance.
Also i want to mention that after it crashes i get this message
Untitled5.jpg

kind regards

George
You do not have the required permissions to view the files attached to this post.
tginga
Posts: 1
Joined: Mon May 01, 2023 6:45 pm

Re: Pfd and Nd blank after start the software

Post by tginga »

Hi George,
I had this issue as well, you need to update your graphics driver to the latest available version. If with the newest driver you still have this error it means your graphics card is not supported by the OpenGL used by the software.

Tudor
gillesaqsim
Posts: 69
Joined: Fri Nov 04, 2022 5:36 pm

Re: Pfd and Nd blank after start the software

Post by gillesaqsim »

Hello George,
are you under windows 10 or older release.
since the 58 a320FMGS you must have windows 10 mini.
regards
sxa1376
Posts: 3
Joined: Fri Jun 14, 2024 9:37 am

Re: Pfd and Nd blank after start the software

Post by sxa1376 »

Hi
i have downloaded the latest drivers for the gpu but i see the same error.
i am running win7x64 and inside the installation guide it has this version of windows.
If it must win10 installed can you please send me a download link of the program
with the lates version before it must use win10?

Kind regards

George
gillesaqsim
Posts: 69
Joined: Fri Nov 04, 2022 5:36 pm

Re: Pfd and Nd blank after start the software

Post by gillesaqsim »

sxa1376
Posts: 3
Joined: Fri Jun 14, 2024 9:37 am

Re: Pfd and Nd blank after start the software

Post by sxa1376 »

Hi,
I tried the three versions, B57.1.4 B57.1.3 B57.1.2 but the same thing happened.
Only the SD was working and all the rest (pfd's nd's and the engine warning) are blank.
To be honest until now i used the version B53.3.6 which this version for me working
perfect but the problem with this version is that no including the exterior lights.
So does anyone has a version with the exteriors lights available and to run to win7?
Many thanks in advance.

Kind regards
George
gillesaqsim
Posts: 69
Joined: Fri Nov 04, 2022 5:36 pm

Re: Pfd and Nd blank after start the software

Post by gillesaqsim »

yes I know, it's always scary to have to reformat your PC to install a new OS....
you should find a cheap Win 10 key on the internet...
also if you don't do it you will always be behind and it's going backwards to jump better... JEEHELL does a remarkable job and the exterior lights only represent a tiny visible part of the iceberg.
As I often say.... when you are in the cockpit, you are not supposed to see your plane!
good luck and good flights
Gilles
Post Reply